💰>>>>>>>> Make A Donation <<<<<<<<💰

Station-Drivers only receives 50% of advertising revenue and the rest from donations to finance the operation of S-D, I internally thank some who regularly give me €1, €2, €5, €10,..., to be able to continue. A big thank you to those who give me regularly like 😉: Filippo-F, Ansley-B, Thierry-L, Jesus-F, Petr-H, Dionysios-S, Andreas-M, Amrit-L, Adrianus-L, Yunlun-T, Marlon-B, Xavier-M, Huang-X, ....
This allows me to continue my passion and be able to share it with you allFdrsoft 


Information! With the donations made, Station-Drivers will migrate to a new, more powerful server in early August 2024 to resolve the site's slowdown problems (J-11).

ssd Question NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

Replied by Shonk on topic NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

Posted 3 weeks 5 days ago #3036
There are 3 versions of the chip

Well 1 version of the chip but 3 versions of the pcb

NVME
SATA
SATA/NVME

my guess is you ordered the NVME only version
by Shonk

Please Log in or Create an account to join the conversation.

Replied by lapis on topic NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

Posted 3 weeks 4 days ago #3037
OK, I suppose that those item descriptions on Aliexpress can't be trusted... :-D
It was this "CoolFish M2 SSD Case NVMe SATA Dual Protocol" for a bit over 3$.
I suppose there is no way to add SATA support by firmware or some easy mod?
by lapis

Please Log in or Create an account to join the conversation.

Replied by Laroldski on topic NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

Posted 2 weeks 3 days ago #3070

OK, I suppose that those item descriptions on Aliexpress can't be trusted... :-D
It was this "CoolFish M2 SSD Case NVMe SATA Dual Protocol" for a bit over 3$.
I suppose there is no way to add SATA support by firmware or some easy mod?

@lapis If you want a great ssd enclosure for NVMe ssd's try the one in the link in black it has an RTL9210 controller the other one in grey has a JMS583 controller,their not much more money and way better built then those coolfish ones.

www.aliexpress.com/item/1005006437088311...in.29.27c11802Al6Vvk
 

Please Log in or Create an account to join the conversation.

Replied by ole258 on topic NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

Posted 2 weeks 3 days ago #3073
I have bought a Lexar E300 NVME enclosure.

 

Here is the Dump:

Warning: Spoiler!


In comparison to most other Dumps, there are much values marked as "n/a".

For example:

U2PHY = 02 f4 9b e0 e1
U3PHY = 02 d4 09 00 d5 00 80
DISK_HOTPLUG = 0x0
PINMUX1 = 0x0
PINMUX2 = 0x700
U2_MAXPWR = 0xfa
U3_MAXPWR = 0x0
ASPMDIS = 0x0

For what are these values for?

Is it recommended to add it at the config file?
 
Last Edit:2 weeks 3 days ago by ole258
Last edit: 2 weeks 3 days ago by ole258.

Please Log in or Create an account to join the conversation.

are you sure that´s a Realtek RTL9210/RTL9220 Chip inside?

Please Log in or Create an account to join the conversation.

Time to create page: 1.001 seconds
Powered by Kunena Forum